Как видите етот заголовок я прочитал на одном буржуйском сайте.
они пишут будто бы какой то там моторист с Мотофана (имя не указано)взламал RSA таким способом:


While browsing through other sites I came across this method on the russian site motofan and an english version on another site maxmobile.(I'm not able to post links to the exact post so you have to search for them)

Everything here is copied from the english version on maxmobile

Warning: after doing this procedure you won't be able to flash phone again without doing testpoint (because that boot loader can only start phone). GandjaFuzz and Vilko are making dualboot to solve this problem.

1) Download Flash&backup3 (you will need version 3.0.2 or later)
2) Make phone backup in shx format using Flash&backup3
3) Patch RSA2 using Flash&backup3: go to 'Firmwares' in flash&backup3, press 'Select file' and select your shx file, check 'Remove RSA verification (new method for LTE2 phones)' and save firmware by pressing 'Save as...' and choosing shx format.
4) Split shx file into CGs.
5) Patch CG1 using 'Run Phone Lte2' patch. And compile patched CGs into shx (CG1, CG3, CG7, CG18)
6) Now we need to do testpoint.
7) When doing testpointing connect phone to pc and run RAMLDR2 program.
8) Press 'Send loader' and program will show 'ready'.
9) Press 'Write boot' and open 'Boot_0AC0_patch.bin' file. Program will show 'OK' when finished.
10) Now after turning on the phone it will be in blank mode, it's ok.
11) Now we flash patched firmware (CG1, CG3, CG7, CG18).
12) Now after turning on the phone it will be in blank mode again.
13) Start RAMLDR2 again and press 'send loader' (program will show 'ready')
14) Press 'Write boot' and open 'Boot_Start_SW.bin'. Program will show 'OK' when finished.
15) Done, no RSA protection.

All the files needed(in bold) can be found on either of those sites

-UGunit


кто ришытса отпишытьсь как можно скорей.
(Просто я с помощью Т.П.уже убил одно тело полностью!)